typedef enum tagSymbologyIdXmit
{
ITC_ID_XMIT_DISABLE = 0
ITC_ID_XMIT_CUSTOM = 1
ITC_ID_XMIT_AIM = 2
}ITC_SYMBOLOGY_ID_XMIT;
700 Series Color Mobile Computer User's Manual
Symbology ID Transmission Option
The symbology identifier (or code mark) concept provides a standardized
way for a device receiving data from a bar code reader to differentiate be-
tween the symbologies.
The following symbology ID transmission option specifies whether or not
the symbology ID should be transmitted as part of the scanned bar code
label to all the connected data collection applications. Options for trans-
mission are: do not transmit, transmit the standard AIM identifiers, or
transmit the one byte custom defined identifiers. AIM and custom identi-
fiers cannot be selected to be transmitted at the same time; only the last
selected option will be active.
Symbology identifier will not be transmitted as part of the
label. This is the default setting.
Activate custom symbology identifier transmission for all
symbologies. Example of the transmitted label:
[preamble] [Custom ID] <data> [postamble]
Activate AIM symbology identifier transmission for all
symbologies. Example of the transmitted label:
[preamble] [AIM symbology ID] <data> [postamble]
Chapter
6
—
Scanner Support
215