Codabar - Intermec 700 Series User Manual

Appendix A — Control Panel Applets
292

Codabar

Codabar is a self-checking, discrete symbology.
Action
Tap (+) to expand the Codabar parameter, select a setting to be changed,
then select an option from the drop-down list to change this setting.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.1.1.5.1
Options
Decoding
Start/Stop
CLSI library system (Not supported when using an imager):
Check digit
Bar code length
Minimum length
Fixed length 1
Fixed length 2
Fixed length 3
Note: If Bar code length = "1" then Minimum length is entered. If Bar
code length = "2" then Fixed length 1, Fixed length 2, or Fixed length 3
is entered.
0 Not active (default)
1 Active
0 Not transmitted (default)
1 abcd transmitted
2 ABCD transmitted
3 abcd/tn*e transmitted
4 DC1`DC4
0 Not active (default)
1 Active
0 Not used (default)
1 Transmitted
2 Not transmitted
0 Any length
1 Minimum length (default)
2 Fixed lengths
003-254 Minimum length 3-254 (6)
000-254 Fixed length 0-254 (0)
000-254 Fixed length 0-254 (0)
000-254 Fixed length 0-254 (0)
700 Series Color Mobile Computer User's Manual
transmitted