Plessey - Intermec 700 Series User Manual

Appendix A — Control Panel Applets
298

Plessey

Plessey is a pulse-width modulated symbology like most other bar codes. It
includes a start character, data characters, an eight-bit cyclic check digit,
and a termination bar. The code is continuous and not self-checking. You
need to configure two parameters for Plessey code: Start Code and Check
Digit. Note that this is not available when you use an imager with your 700
Series Computer.
Action
Tap (+) to expand the Plessey parameter, select the setting to be changed,
then select an option to change this setting or select an option from the
drop-down list.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.1.1.10.1
Options
Decoding
Check digit
Bar code length
Minimum length
Note: If Bar code length = "1" then Minimum length is entered.
0 Not active (default)
1 Active
0 Not transmitted (default)
1 Transmitted
0 Any length (default)
1 Minimum length
001-254 Minimum bar code length 1-254 (6)
700 Series Color Mobile Computer User's Manual