Intermec 700 Series User Manual page 138

Color mobile computer

Hide thumbs Also See for 700 Series:

Table of Contents

700 Series Color Mobile Computer User's Manual

6 Press and hold the new connection for a pop-up menu, then tap

Connect to initiate the connection. Wait for about ten seconds for the

Network Log On screen, then tap OK. Note: You do not need to enter any

information within the Network Log On screen.

7 Use either the onscreen keyboard, or press the keys to type any of the

AT commands provided by Sierra Wireless. Press or tap Enter to send

each command. The results of each command sent will print onscreen -

see the sample illustration below. Note that each "AT" command must

start with either the "at" or "at+" characters.

S To see what you typed onscreen, type "ate1" to initiate the AT Echo

command, then press Enter.

Network Support