Is9Cconfig::getcode39 - Intermec 700 Series User Manual

Chapter 6 — Scanner Support
176

IS9CConfig::GetCode39

This function retrieves the current settings of Code 39.
Syntax
HRESULT IS9Cconfig::GetCode39( ITC_CODE39_DECODING*
peDecode, ITC_CODE39_FORMAT* peFormat,
ITC_CODE39_START_STOP* peSS,ITC_CODE39_SS_CHARS* peSSChars,
ITC_CODE39_CHECK_DIGIT* peCheck, DWORD* pwLength );
Parameters
peDecode [out]
peFormat [out]
peSS [out]
peSSChars [out]
peCheck [out]
pwLength [out]
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Pointer to the ITC_CODE39_DECODING
location to receive the decoding for Code 39.
Pointer to the ITC_CODE39_FORMAT location
to receive the Code 39 format.
Pointer to the ITC_CODE39_START_STOP
location to receive the Code 39 start/stop.
Pointer to the ITC_CODE39_SS_CHARS
location to receive the Start/Stop character.
Pointer to the ITC_CODE39_CHECK_DIGIT
location to receive the check digit.
Pointer to the DWORD location to receive the bar
code length.
700 Series Color Mobile Computer User's Manual