Standard 2 Of 5 Default Settings - Intermec 700 Series User Manual

Chapter 6 — Scanner Support
Parameter Default
Decoding Not Active
Format Identicon (6 Start/Stop bars)
Check Digit Not Used
Bar Code Length Minimum Length = 6
typedef enum tagStandard2of5Decoding
{
ITC_STANDARD2OF5_NOTACTIVE = 0, // Default
ITC_STANDARD2OF5_ACTIVE = 1,
ITC_STANDARD2OF5_NO_CHANGE = 255
} ITC_STANDARD2OF5_DECODING;
typedef enum tagStandard2of5Format
{
ITC_STANDARD2OF5_FORMAT_IDENTICON, // Default
ITC_STANDARD2OF5_FORMAT_COMPUTER_IDENTICS,
ITC_STANDARD2OF5_FORMAT_NO_CHANGE = 255
} ITC_STANDARD2OF5_FORMAT;
typedef enum tagStandard2of5CheckDigit
{
ITC_STANDARD2OF5_CHECK_NOTUSED, // Default
ITC_STANDARD2OF5_CHECK_XMIT,
ITC_STANDARD2OF5_CHECK_NOTXMIT,
ITC_STANDARD2OF5_CHECK_NO_CHANGE = 255
} ITC_STANDARD2OF5_CHECK_DIGIT;
typedef enum tagBarcodeLengthId
{
ITC_BARCODE_LENGTH = 0,
ITC_BARCODE_FIXED_LENGTH,
ITC_BARCODE_LENGTH_NO_CHANGE = 255
} ITC_BARCODE_LENGTH_ID;
196

Standard 2 of 5 Default Settings

Standard 2 of 5 Enumerations
Valid Range
ITC_STANDARD2OF5_DECODING
ITC_STANDARD2OF5_FORMAT
ITC_STANDARD2OF5_CHECK_DIGIT
0x00-0xFE ITC_BC_LENGTH_NO_CHANGE
700 Series Color Mobile Computer User's Manual