Intermec 700 Series User Manual page 100

700 Series Color Mobile Computer User's Manual
4 Click Install to install the AUTORUN files onto the storage card.
5 Create a "\Cabfiles" folder on the storage card. Copy any CAB files that
are to be extracted on every startup into this folder.
6 In the "\2577" directory, add your custom AUTOUSER.DAT file. See
the Recovery Help for more information on how to set up an
AUTOUSER.DAT file.
7 If you are using the RegFlushKey() API, the application must use a spe-
cial API to make sure the registry is written to the appropriate card; or
you can use the Utilities control panel applet, as follows:
a From the 700 Series Computer, tap Start → Settings → the System
tab → the Utilities icon → the Registry Save tab.
b Tap Enable Registry Storage, then tap either of the following:
S SD
To write the registry to the SecureDigital storage card.
S CF
To write the registry to the CompactFlash storage card.
c Tap ok to save your entry and exit the Utilities control panel applet.
Note: If you are using a SecureDigital storage card, you must change any
disk access from "Storage Card" to "SDMMC Disk."
8 Remove the storage card from the desktop PC and install the card into
the 700 Series Color Computer.
9 Perform a cold-boot on the 700 Series Color Computer. Files will
automatically install from the storage card upon reboot. Any calls to the
RegFlushKey() API will automatically write the registry to the
appropriate location.
Chapter 3 — Installing Applications
81