Intermec 700 Series User Manual page 369

Appendix B — Unit Manager
Imager
Virtual Wedge
SNMP
Security
350
Within the Unit Manager, select Configuration Management → Data
Collection, then click the Imager tab to access the following parameters.
Options for these parameters are listed on the page provided. These are
listed in alphabetical order.
S Aimer LED Duration (page 323)
S Image Dimension (page 324)
Within the Unit Manager, select Configuration Management → Data
Collection, then click the Virtual Wedge tab to access the following
parameters. Options for these parameters are listed on the page provided.
These are listed in alphabetical order.
S Code Page (page 329)
S Grid (page 328)
S Postamble (page 327)
S Preamble (page 326)
S Virtual Wedge (page 325)
Within the Unit Manager, click Configuration from the left navigation
bar, then click the SNMP icon to access any of these tabs: Security, Traps,
or Identification.
Within the Unit Manager, select Configuration Management → SNMP,
then click the Security tab to access the following parameters. Options for
these parameters are listed on the page provided. These are listed in alpha-
betical order.
S Encryption Key (page 335)
S Read Encryption (page 333)
S Read Only Community (page 331)
S Read/Write Community (page 332)
S Write Encryption (page 334)
700 Series Color Mobile Computer User's Manual