Intermec 700 Series User Manual page 262

Required? Yes
Flag
COPYFLG_WARN_IF_SKIP
COPYFLG_NOSKIP
COPYFLG_NO_OVERWRITE
COPYFLG_REPLACEONLY
CE_COPYFLG_NO_DATE_DIALOG
CE_COPYFLG_NODATECHECK
CE_COPYFLG_SHARED
700 Series Color Mobile Computer User's Manual
[CopyFiles]
This section, under the [DefaultInstall] section, describes the default files
to copy to the target device. Within the [DefaultInstall] section, files were
listed that must be defined elsewhere in the INF file. This section identi-
fies that mapping and may contain flags.
S copyfile_list_section:
The source_filename parameter is optional if it is the same as destina-
tion_filename.
S copyfile_list_section:
The numeric value that specifies an action to be done while copying fi-
les. The following table shows values supported by Windows CE.
Value
0x00000001 Warn user if skipping a file is attempted after error.
0x00000002 Do not allow a user to skip copying a file.
0x00000010 Do not overwrite files in destination directory.
0x00000400 Copy the source file to the destination directory only if the
0x20000000 Do not copy files if the target file is newer.
0x40000000 Ignore date while overwriting the target file.
0x80000000 Create a reference when a shared DLL is counted.
Example
[DefaultInstall.SH3]
CopyFiles = Files.Common, Files.SH3
[DefaultInstall.MIPS]
CopyFiles = Files.Common, Files.MIPS
destination_filename,[source_filename]
flags
Description
file is already in the destination directory.
Chapter 7 — Programming
243