Intermec 700 Series User Manual page 140

700 Series Color Mobile Computer User's Manual
S Bluetooth Point to Point:
This is the network type. "Point to Point" is the type of connection sup-
ported as of this publication. Scatternets are not supported. The only sup-
ported application is wireless printing to Intermec wireless printers, such
as the 781T Belt-Mount Printer.
S Device Address:
This provides the network address, which in this case, will be replaced
by the device address of the Bluetooth compatible module within your
700 Series Computer. Note that this address is universally unique.
S Discoverable:
The following is displayed depending on whether the 700 Series Com-
puter is configured to be discoverable:
"Gen" Generally discoverable
"Lim" Limited discovery
"No" Not discoverable
S Connectable:
This defines whether the 700 Series Computer is able to accept other
devices with Bluetooth compatible modules connecting to it. "Yes" if the
connection is doable, "No" if not.
S Bondable:
This defines the security element of the 700 Series Computer, which is
the bondable setting. If the unit is bondable, then "Yes" is displayed,
otherwise "No" is displayed.
S Module Firmware:
This reflects the firmware (hardware) version of the 700 Series Comput-
er. When the CORE module first installs onto the unit, the firmware
level is unknown, thus "...reading" is displayed. Once the firmware level
is read from the unit, then a three-digit decimal is displayed.
S Stack [Stack Version] [loaded/not loaded]:
[Stack Version] displays the Bluetooth stack version, which appears in the
"1.2.3.4" format. If the stack is loaded, then "loaded" is displayed after
the stack version, otherwise "not loaded" is displayed.
S Device Name:
This displays the device name as assigned to the Bluetooth compatible
module by the end-user. If the configured name is longer than the space
allowed, it will be truncated.
S BTpak Version:
This displays the driver version of additional Bluetooth components
within the 700 Series Computer and is usually presented in the "1.2.3"
format. The version may also contain a letter at either end.
S History:
This bar graph displays an active history of this wireless printer driver' s
quality of connections.
S Friendly Indicator:
If the Bluetooth stack is loaded, then all three dots are filled. These dots
are left empty if the stack is not loaded. These dots do vary based on the
CORE application' s perception of the overall connection quality.
Chapter 4 — Network Support
121