Is9Cconfig2::Setcustomsymids - Intermec 700 Series User Manual

Chapter 6 — Scanner Support
208

IS9CConfig2::SetCustomSymIds

This function updates the symbology identifiers (any ASCII values) for the
currently supported symbologies. This is not supported when using an imag-
er on the 700 Series Computer.
Syntax
HRESULT SetCustomSymIds( ITC_CUST_SYM_ID_PAIR*
pStructSymIdPair, DWORD dwNumElement );
Parameters
pStructSymIdPair [in] Pointer to ITC_CUST_SYM_ID_PAIR
dwNumElement [in] Identifies the number of symbology identifiers
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
location, containing the new symbology
identifiers for any supported symbologies to
update.
to update in the pStructSymIdPair buffer.
700 Series Color Mobile Computer User's Manual