Intermec 700 Series User Manual page 308

Symbologies
700 Series Color Mobile Computer User's Manual
You can change bar code symbology parameter settings in your 700 Series
Computer via the Data Collection control panel applet. The following
parameters are for bar code symbologies. Additional information about the
more common bar code symbologies are in Appendix C, "Bar Code
Symbologies." Note that these parameters are listed in the order of their
appearance within this tab.
Most of these symbologies apply to both the imager and the laser scanner
tools. However, when using an imager, the Macro PDF (page 300), Micro
PDF 417 (page 302), Matrix 2 of 5 (page 304), Telepen (page 305), and
Code 11 (page 306) symbologies are not supported. Likewise, when using
a laser scanner, the QR Code (page 307) and Data Matrix (page 308)
symbologies are not supported.
The following table shows which bar code symbologies are supported ei-
ther by an imager or by a laser scanner.
Bar Code Symbology
Code 39
Interleaved 2 of 5
Standard 2 of 5
Matrix 2 of 5
Code 128
Code 93
Codabar
MSI
Plessey
UPC
EAN/EAN 128
Code 11
PDF 417
Micro PDF 417
Telepen
Data Matrix
QR Code
Appendix A — Control Panel Applets
Imager Laser Scanner
X X
X X
X X
X
X X
X X
X X
X
X
X X
X X
X
X X
X
X
X
X
289