Intermec 700 Series User Manual page 333

Appendix A — Control Panel Applets
Action: Tap (+) to expand the Symbology ID parameter, select the Code 11 user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.16.1
Options: x
314
Code 11 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Code 11 bar code data. Note that this is not
available when you use an imager with your 700 Series Computer.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is asterisk (*).
700 Series Color Mobile Computer User's Manual