5
Customizing Your User Experience
This section explains how to configure your Scopia XT Series so that your user experience is
optimal. For example, you can automatically block your video so that other participants
cannot see you when you accept a call, or define how you answer incoming calls.
All configurations described in this section are optional; you can perform them in any order
and at any time.
Setting the User PIN Code for the Scopia XT Series Endpoint
You can set a PIN code to access basic settings, such as the language displayed on the
interface. If set, you are required to enter this code before viewing or modifying any basic
settings. This can be done from the endpoint itself or from the Scopia XT Series web interface.
By default, you do not need to enter any PIN to access and modify basic settings.
You can perform this procedure with your XT Remote Control Unit as described below, or
using your keyboard and mouse (for more information, see
Control the Scopia XT Executive" on page
You can also modify the administrator PIN code, required to access and modify advanced
settings, such as defining camera settings or enabling SNMP management. To modify the web
username and password for the Scopia XT Series, see Administrator Guide for SCOPIA XT
Series.
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
•
•
•
•
•
•
•
"Using the Keyboard and Mouse to
21).
Customizing Your User Experience | 74