Dialing A Number Directly From The Endpoint - RADVision Scopia XT Executive User Manual

Dialing a Number Directly from the Endpoint

This section describes how to dial a number from the endpoint itself. This is the most common
way to place calls. Alternatively, you can dial a number remotely from the Scopia XT Series
web interface (see
If your system administrator enabled encryption in your system and your call is secured, an
icon showing a padlock
Guide for Scopia XT Series.
Note
Using encryption is subject to local regulation, in some countries it is restricted or limited for
usage. Please consult your local reseller for further details.
From your endpoint, you can dial a number in the following ways:
The system stores a list of recent calls, and displays these icons appear next to a contact
number or name:
Note
Your organization may also have implemented a dial plan, which defines various dial prefixes
to determine the characteristics of a call. For example, you may be able to dial 8 before the
videoconference number for a lower bandwidth call, or 6 for an audio-only call. For more
information on the dial plan in your organization, contact your system administrator.
You can perform this procedure with your XT Remote Control Unit as described below, or
using your keyboard and mouse (for more information, see
Control the Scopia XT Executive" on page
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
•
Keyboard clicking can be disruptive to the videoconference, so we recommend using the
mute when listening but not actively participating.
•
If you are using the optional camera only: Zooming too close can show that your eyes are
not looking directly at the camera, in some cases. You can adjust the zoom using your
scroll wheel of your mouse.
•
If you are using the optional Microphone Pod only: Mute the Microphone Pod before
moving it.
•
Avoid using your cellular phones during your meeting to avoid electromagnetic
interference.
"Dialing a Number from the Scopia XT Series Web Interface" on page
•
Dialing a number using the XT Remote Control Unit
•
Dialing a contact in the phone book (to add a contact to the phone book, see
Modifying Contacts in the Phone Book" on page
•
Dialing a number from the recent calls list
•
— Received call
•
— Dialed call
•
— Missed call
appears on your display. For more information, see Administrator
21).
45)
"Using the Keyboard and Mouse to
Making Point-to-Point Video Calls | 38
39).
"Adding and