Remotely Setting an End Time for the Videoconference
When you are hosting a videoconference with your Scopia XT Series MCU Edition, you can set
an end time. This is done from the Scopia XT Series web interface only.
For more information on managing videoconferences with an Scopia XT Series MCU Edition,
see
Procedure
Step 1
Step 2
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
Figure 4-9
"Moderating a Hosted Videoconference" on page
Access the XT Series web interface, as described in
Interface" on page
14.
Select Make your call > Conference > Settings > Scheduling.
The Scheduling page appears.
Figure 4-10
Ending a videoconference
66.
"Accessing Scopia XT Series Web
Setting end date and time
Hosting Videoconferences | 72