Changing The Video Layout During The Call - RADVision Scopia XT Executive User Manual

Figure 3-11
To change the layouts, see

Changing the Video Layout During the Call

A video layout is the arrangement of participant images as they appear on the monitor in a
videoconference. If the meeting includes a presentation, a layout can also refer to the
arrangement of the presentation image together with the meeting participants.
During the call, you can change your monitor's current layout to the options described in
Table 3-5 on page
videoconference from a Scopia XT Series MCU Edition, see
the Scopia XT Series MCU Edition" on page
For more information about video layouts in point-to-point calls, see
on page
You can change the layout in one of the following ways:
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
Showing the monitor in Pip, PaP, and PoP views
51. To change the video layout for all participants when you are hosting a
49.
•
Press the Layouts
the full screen, PoP, PaP, and PiP video layouts, described in
Table 3-5 Video layout options
Layout
Fullscreen
PoP
"Changing the Video Layout During the Call" on page
64.
key on the XT Remote Control Unit repeatedly to switch between
Description
The full screen view shows one video image. Typically, the
remote presentation is displayed, or, if there is no
presentation, your computer screen.
The PoP (Picture out Picture) view shows up to three images
of different size, presented side by side. The image on the
left is larger, with two smaller images on the right.
51.
"Changing the Video Layout from
"About Video Layouts"
Table 3-5 on page
Making Point-to-Point Video Calls | 51
51.