Table of Contents
Advertisement
Step 3
Configuring Gatekeeper Settings
A gatekeeper routes video calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings as described in this
procedure.
Before you begin
This procedure is performed as part of the basic configuration after
Settings" on page
To access the quick setup wizard, see
Note
If you are modifying these settings after initial setup, navigate to Configure > Network >
H.323 from the Main menu.
Procedure
Step 1
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
Table 2-4
Configuring IP addresses
Field Name
IP address
Subnet mask
Gateway
DNS
To configure your gatekeeper's settings, select Next and continue with
Gatekeeper Settings" on page
30. Consult with your network administrator to configure these fields.
Set the Use Gatekeeper list to Yes.
Description
Enter the system static IP address here, used for accessing and
managing the system.
If the system retrieves its IP address automatically, this field
displays the IP address assigned to the system.
Enter the subnet mask associated with the IP address.
If the system retrieves its IP address automatically, this field
displays the subnet mask that has been assigned.
Enter the default gateway static IP address. The gateway is used to
route information between two subnets, for example, between the
headquarters and a partner site.
If the system gets its IP address automatically, this field displays the
gateway IP address assigned to the system.
Enter the DNS server IP address. The DNS server in your network
resolves domain names in your network and translates them into IP
addresses.
If the system gets its IP address automatically, this field displays the
assigned DNS server IP address.
32.
"Accessing the Quick Setup Procedure" on page
"Configuring
"Configuring Network
26.
Getting Started | 32
Advertisement
Table of Contents
