Config Router Rtrdiscovery Lifetime; Config Router Rtrdiscovery Address; Config Router Rtrdiscovery Preference; Show Router Rtrdiscovery - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

config router rtrdiscovery lifetime

This command configures the value, in seconds, of the lifetime field of the router advertisement
sent from this interface. The range is the maxinterval to 9000 seconds.
Default
Format

config router rtrdiscovery address

This command configures the address to be used to advertise the router for the interface.
Default
Format

config router rtrdiscovery preference

This command configures the preferability of the address as a default router address, relative to
other router addresses on the same subnet. The range is -2147483648 to -1 to 0 to 1 to
2147483647.
Default
Format

show router rtrdiscovery

This command displays the router discovery information for all interfaces, or a specified interface.
Format
Ad Mode
Max Int
Min Int
Adv Life
Preferences
Routing Commands
3 * maxinterval
config router rtrdiscovery lifetime <slot.port>
<maxinterval-9000>
224.0.0.1
config router rtrdiscovery address <slot.port>
<ipaddr>
0
config router rtrdiscovery preference <slot.port> <-
2147483648-2147483647>
show router rtrdiscovery <slot.port/all>
Displays the advertise mode which indicates whether router discovery is enabled
or disabled on this interface.
Displays the maximum advertise interval which is the maximum time allowed
between sending router advertisements from the interface in seconds.
Displays the minimum advertise interval which is the minimum time allowed
between sending router advertisements from the interface in seconds.
Displays advertise lifetime which is the value of the lifetime field of the router
advertisement sent from the interface in seconds.
Displays the preference of the address as a default router address, relative to
other router addresses on the same subnet.
202-10009-01
8-29