Mitsubishi Electric FR-E720-0.1K(SC) Instruction Manual page 79

Parameter list
Func-
Parameter Name
tion
C22 Frequency setting voltage bias
(922) frequency (built-in potentiometer)
∗9∗10
C23 Frequency setting voltage bias (built-in
(922) potentiometer)
∗9∗10
C24 Frequency setting voltage gain
(923) frequency (built-in potentiometer)
∗9∗10
C25 Frequency setting voltage gain (built-in
(923) potentiometer)
∗9∗10
990 PU buzzer control
991 PU contrast adjustment
Pr.CL Parameter clear
ALLC All parameter clear
Er.CL Faults history clear
Pr.CH Initial value change list
∗1 Differ according to capacities.
6%: 0.75K(SC) or less
4%: 1.5K(SC) to 3.7K(SC)
3%: 5.5K(SC), 7.5K(SC)
2%: 11K(SC), 15K(SC)
∗2
Differ according to capacities.
5s: 3.7K(SC) or less
10s: 5.5K(SC), 7.5K(SC)
15s: 11K(SC), 15K(SC)
∗3
Differ according to capacities.
6%: 0.1K(SC), 0.2K(SC)
4%: 0.4K(SC) to 7.5K(SC)
2%: 11K(SC), 15K(SC)
∗4
Write is disabled in the communication mode (Network operation mode) from the PU connector.
∗5
The initial value differs according to the voltage class. (100V, 200V class/400V class)
∗6 The range differs according to the Pr. 71 setting.
∗7
Theses parameters can be set only in the safety stop function model.
∗8
The setting values "68 and 168" are only available for the safety stop function model with FR-E7DS mounted. (Refer to page 338)
∗9 Set this parameter when calibrating the operation panel built-in potentiometer for the FR-E500 series operation panel (PA02) connected with cable.
∗10 The parameter number in parentheses is the one for use with the operation panel (PA02) for the FR-E500 series or parameter unit (FR-PU04/FR-PU07).
∗11 These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from RS-485 communication. (Refer to
page 214 for RS-485 communication).
∗12 When a communication option is installed, parameter clear (lock release) during password lock (Pr. 297 ≠ 9999) can be performed only from the
communication option.
∗13 Available only for the three-phase power input model.
78
Minimum Refer
Initial
Setting Range Setting to
Value
Increments Page
0 to 400Hz 0.01Hz 0 278
0 to 300% 0.1% 0 278
0 to 400Hz 0.01Hz 60Hz
278
0 to 300% 0.1% 100% 278
0, 1 1 1 276
0 to 63 1 58 276
0, 1 1 0 284
0, 1 1 0 284
0, 1 1 0 286
— — — 285
Customer
Parameter Remarks
Setting
C22
(922)
C23
(922)
C24
(923)
C25
(923)
990
991
Pr.CL
ALLC
Er.CL
Pr.CH
Control Mode-based
Instruction Code
Correspondence Table
Read Write Extended
V/F V/F V/F AD MFVC AD MFVC AD MFVC GP MFVC GP MFVC GP MFVC
16 96 9
16 96 9
17 97 9
17 97 9
5A DA 9
5B DB 9
— FC — — — —
— FC — — — —
— F4 — — — —
— — — — — —
Parameter list
Parameter
Copy Clear All clear
×
×
×
×
×
— — —
— — —
— — —
— — —
4