Download  Print this page

Measurement Of Main Circuit Voltages, Currents And Powers - Mitsubishi Electric FR-E720-0.1K(SC) Instruction Manual

Fr-e700 series.
Hide thumbs

Advertisement

Measurement of main circuit voltages, currents and powers

6.2
Measurement of main circuit voltages, currents and powers
Since the voltages and currents on the inverter power supply and output sides include harmonics, measurement data
depends on the instruments used and circuits measured.
When instruments for commercial frequency are used for measurement, measure the following circuits with the instruments
given on the next page.
When installing meters etc. on the inverter output side
When the inverter-to-motor wiring length is large, especially in the 400V class, small-capacity models, the meters and CTs
may generate heat due to line-to-line leakage current. Therefore, choose the equipment which has enough allowance for
the current rating.
To measure and display the output voltage and output current of the inverter, it is recommended to use the FM-SD terminal
output function of the inverter.
Three-
phase power input
Single-phase power input
Three-phase
power supply
Instrument types
∗ At, As, Vt, Vs, W12, W13 are only for the three-phase power input specification models.
320
Input voltage
Input current
Inverter
Ar
W11
R/L1
Vr
As
W12
S/L2
Vs
W13
At
T/L3
Vt
P/+ N/-
V
+
Examples of Measuring Points and Instruments
Au
U
W21
Vu
V
Av
Vv
Aw
W
W22
Vw
-
Output voltage
Output current
To the motor
: Moving-iron type
: Electrodynamometer type
: Moving-coil type
: Rectifier type

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E720-0.1K(SC)

   Related Content for Mitsubishi Electric FR-E720-0.1K(SC)

Comments to this Manuals

Symbols: 0
Latest comments: