Download  Print this page

Mitsubishi Electric FR-E720-0.1K(SC) Instruction Manual Page 189

Fr-e700 series.
Hide thumbs

Advertisement

(2)
User group function (Pr. 160, Pr. 172 to Pr. 174)
The user group function is designed to display only the parameters necessary for setting.
From among all parameters, 16 parameters maximum can be registered in the user group. When Pr. 160 is set to "1", only
the parameters registered to the user group can be accessed. (The parameters not registered in the user group can not be
read.)
To set a parameter in the user group, set its parameter number in Pr. 173.
To delete a parameter from the user group, set its parameter number to Pr. 174. Set "9999" in Pr. 172 to batch delete
parameters registered.
(3)
Registration of parameter to user group (Pr. 173)
When registering Pr. 3 to user group
Operation
1.
Confirm the operation display and operation
mode display.
The inverter should be at a stop.
Make sure that the inverter is in PU
operation mode.
(Press
mode.)
2.
Press
to choose the parameter setting
mode.
3.
Turn
to change the set value to
"
".
4.
Press
to display
5.
Turn
until Pr. 3 appears.
6.
Press
to set.
"
" and "
To continue parameter registration, repeat
steps 3 to 6.
Misoperation prevention and parameter setting restriction
in the External operation
.
" are displayed alternately.
Flicker...Registration of Pr. 3 to user group
Display
Parameter setting mode
Displays Pr. 173 User group
registration
When Pr. 173 is read, "9999"
is displayed
Select the parameter number
to be registered.
completed!!
4
189

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E720-0.1K(SC)

Comments to this Manuals

Symbols: 0
Latest comments: