Download  Print this page

Parameter Clear/ All Parameter Clear - Mitsubishi Electric FR-E720-0.1K(SC) Instruction Manual

Fr-e700 series.
Hide thumbs

Advertisement

Parameter clear/ All parameter clear

4.25 Parameter clear/ All parameter clear
POINT
Set "1" in Pr.CL Parameter clear, ALLC all parameter clear to initialize all parameters. (Parameters are not cleared
when "1" is set in Pr. 77Parameter write selection.)
Refer to the extended parameter list on page 62 for parameters cleared with this operation.
Operation
1.
Screen at powering ON
The monitor display appears.
2.
Press
to choose the PU operation mode.
3.
Press
to choose the parameter setting
mode.
4.
Turn
until
5.
Press
to read the currently set value.
"
"(initial value) appears.
6.
Turn
to change it to the set value "
7.
Press
to set.
Turn
Press
Press
Setting
0
Not executed.
Set parameters back to the initial values. (Parameter clear sets back all parameters except
1
calibration parameters, terminal function selection parameters to the initial values.) Refer to the
parameter list on page 62 for availability of parameter clear and all parameter clear.
REMARKS
and
The inverter is not in the PU operation mode.
PU connector or USB connector is used.
1. Press
. [PU] is lit and the monitor (4 digit LED) displays "1". (When Pr. 79 = "0" (initial value))
2. Carry out operation from step 6 again.
284
(
) appears.
".
Flicker ··· Parameter setting complete!!
to read another parameter.
to show the setting again.
twice to show the next parameter.
Description
are displayed alternately ... Why?
Display
PU indication is lit.
PRM indication is lit.
(The parameter number read previously appears.)
Parameter clear
All parameter clear
Parameter clear
All parameter clear

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E720-0.1K(SC)

Comments to this Manuals

Symbols: 0
Latest comments: