3Com 4200G 12-Port Configuration Manual page 159

4200g family
Hide thumbs Also See for 4200G 12-Port:
Table of Contents

Advertisement

Figure 1-1 MAC address learning diagram (1)
Figure 1-2 MAC address table entry of the switch (1)
2)
After learning the MAC address of User A, the switch starts to forward the packet. Because there is
no MAC address and port information of User B in the existing MAC address table, the switch
forwards the packet to all ports except GigabitEthernet 1/0/1 to ensure that User B can receive the
packet.
Figure 1-3 MAC address learning diagram (2)
3)
Because the switch broadcasts the packet, both User B and User C can receive the packet.
However, User C is not the destination device of the packet, and therefore does not process the
packet. Normally, User B will respond to User A, as shown in
packet from User B is sent to GigabitEthernet 1/0/4, the switch records the association between the
MAC address of User B and the corresponding port to the MAC address table of the switch.
1-2
Figure
1-4. When the response

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4200g 24-port4200g 48-portSwitch 4800g pwr 24-port

Table of Contents