3Com 4200G 12-Port Configuration Manual page 100

To do...
Enter system view
Set an OUI address that can be identified
by the voice VLAN
Enable the voice VLAN security mode
Set the voice VLAN aging timer
Enable the voice VLAN function globally
Enter port view
Enable voice VLAN on a port
Enable the voice VLAN legacy function on
the port
Set voice VLAN assignment mode on a
port to manual
Quit to system view
Enter VLAN view
Access
Add the port to the
port
VLAN
Add a
port in
Enter port view
manual
voice
VLAN
assignm
Add the port to the
ent
VLAN
Trunk or
mode to
Hybrid
the
port
voice
Configure the
VLAN
voice VLAN to be
the default VLAN
of the port
Use the command...
system-view
voice vlan mac-address
oui mask oui-mask
[ description text ]
voice vlan security enable
voice vlan aging minutes
voice vlan vlan-id enable
interface interface-type
interface-number
voice vlan enable
voice vlan legacy
undo voice vlan mode
auto
quit
vlan vlan-id
port interface-list
interface interface-type
interface-num
port trunk permit vlan
vlan-id
port hybrid vlan vlan-id
{ tagged | untagged }
port trunk pvid vlan vlan-id
port hybrid pvid vlan
vlan-id
1-9
Remarks
—
Optional
Without this address,
the default OUI
address is used.
Optional
By default, the voice
VLAN security mode is
enabled.
Optional
The default aging timer
is 1,440 minutes.
Required
Required
Required
By default, voice VLAN
is disabled on a port.
Optional
By default, voice VLAN
legacy is disabled.
Required
The default voice
VLAN assignment
mode on a port is
automatic.
—
Required
By default, all the ports
belong to VLAN 1.
Optional
Refer to Table 1-2 to
determine whether or
not this operation is
needed.