3Com 4200G 12-Port Configuration Manual page 24

Configuration
Configure the protocols the
user interface supports
Set the commands to be
executed automatically after
a user log in to the user
interface successfully
Make terminal services
available
Set the maximum number of
lines the screen can contain
VTY terminal
configuration
Set history command buffer
size
Set the timeout time of a user
interface
Follow these steps to set common telnet configuration:
To do...
Enter system view
Enter one or more VTY user
interface views
Configure the command level
available to users logging in to
VTY user interface
Configure the protocols to be
supported by the VTY user
interface
Set the commands to be
executed automatically after a
user logs in to the user
interface successfully
Enable terminal services
Set the maximum number of
lines the screen can contain
Optional
By default, Telnet and SSH protocol are
supported.
Optional
By default, no command is executed
automatically after a user logs into the VTY user
interface.
Optional
By default, terminal services are available in all
user interfaces
Optional
By default, the screen can contain up to 24 lines.
Optional
By default, the history command buffer can
contain up to 10 commands.
Optional
The default timeout time is 10 minutes.
Use the command...
system-view
user-interface vty
first-number [ last-number ]
user privilege level level
protocol inbound { all |
ssh | telnet }
auto-execute command
text
shell
screen-length
screen-length
3-2
Description
Remarks
—
—
Optional
By default, commands of level 0
are available to users logging in to
VTY user interfaces.
Optional
By default, both Telnet protocol
and SSH protocol are supported.
Optional
By default, no command is
executed automatically after a
user logs into the VTY user
interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.