Specifying A Configuration File For Next Startup - 3Com 4200G 12-Port Configuration Manual

To do...
Erase the startup configuration
file from the storage switch
You may need to erase the configuration file for one of these reasons:
After you upgrade software, the old configuration file does not match the new software.
The startup configuration file is corrupted or not the one you needed.
The following two situations exist:
While the reset saved-configuration [ main ] command erases the configuration file with main
attribute, it only erases the main attribute of a configuration file having both main and backup
attribute.
While the reset saved-configuration backup command erases the configuration file with backup
attribute, it only erases the backup attribute of a configuration file having both main and backup
attribute.
This command will permanently delete the configuration file from the switch.

Specifying a Configuration File for Next Startup

Use the following command to specify a configuration file for next startup:
To do...
Specify a configuration file for
next startup
You can specify a configuration file to be used for the next startup and configure the main/backup
attribute for the configuration file.
Assigning main attribute to the startup configuration file
If you save the current configuration to the main configuration file, the system will automatically set
the file as the main startup configuration file.
You can also use the startup saved-configuration cfgfile [ main ] command to set the file as main
startup configuration file.
Assigning backup attribute to the startup configuration file
If you save the current configuration to the backup configuration file, the system will automatically
set the file as the backup startup configuration file.
You can also use the startup saved-configuration cfgfile backup command to set the file as
backup startup configuration file.
Use the command...
reset saved-configuration
[ backup | main ]
Use the command...
startup saved-configuration
cfgfile [ backup | main ]
1-4
Remarks
Required
Available in user view
Remarks
Required
Available in user view