To do...
Display QoS-related
configuration of a port or all the
ports
Display the priority trust mode
of a port or all the ports
Display traffic shaping
configuration of a port or all the
ports
Display traffic policing
configuration of a port or all the
ports
Display traffic accounting
configuration of a port or all the
ports
Display global QoS
configuration of traffic policing
or traffic accounting
Display VLAN-level QoS
configuration of traffic policing
or traffic accounting
Display port group-level QoS
configuration of traffic policing
or traffic accounting
QoS Configuration Examples
Traffic Policing Configuration Example
Network requirements
As shown in
Figure
PC1 with the IP address 192.168.0.1 belongs to the R&D department and is connected to
GigabitEthernet 1/0/1 of the switch. The marketing department is connected to GigabitEthernet 1/0/2 of
the switch.
Configure traffic policing to satisfy the following requirements:
Set the maximum rate of outbound IP packets sourced from the marketing department to 64 kbps.
Set the maximum rate of outbound IP packets sourced from the R&D department to 128 kbps.
Use the command...
display qos-interface
{ interface-type
interface-number | unit-id } all
display qos-interface
{ interface-type
interface-number | unit-id }
priority-trust
display qos-interface
{ interface-type
interface-number | unit-id }
traffic-shape
display qos-interface
{ interface-type
interface-number | unit-id }
traffic-limit
display qos-interface
{ interface-type
interface-number | unit-id }
traffic-statistic
display qos-global { all |
traffic-limit | traffic-statistic }
display qos-vlan [ vlan-id ]
{ all | traffic-limit |
traffic-statistic }
display qos-port-group
[ group-id ] { all | traffic-limit |
traffic-statistic }
1-10, an enterprise network connects all the departments through a Switch 4200G.
1-25
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view