3Com 4200G 12-Port Configuration Manual page 635

Follow these steps to configure ICMP test on remote-ping client:
To do...
Enter system view
Enable the remote-ping
client function
Create a remote-ping
test group and enter its
view
Configure the
destination IP address
Configure the source IP
address
Configure the test type
Configure the number
of probes per test
Configure the packet
size
Configure the
maximum number of
history records that can
be saved
Configure the
automatic test interval
Configure the probe
timeout time
Configure the type of
service (ToS)
Start the test
Display test results
2) Configuring DHCP test on remote-ping client
Follow these steps to configure DHCP test on remote-ping client:
To do...
Enter system view
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
destination-ip ip-address
source-ip ip-address
test-type icmp
count times
datasize size
history-records number
frequency interval
timeout time
tos value
test-enable
display remote-ping results
[ admin-name operation-tag ]
Use the command...
system-view
1-5
Remarks
—
Required
By default, the remote-ping client
function is disabled.
Required
By default, no test group is configured.
Required
By default, no destination address is
configured.
Optional
By default, no source IP address is
configured.
Optional
By default, the test type is ICMP.
Optional
By default, each test makes one probe.
Optional
By default, the packet size is 56 bytes.
Optional
By default, the maximum number is 50.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the service type is zero.
Required
Required
Available in any view.
Remarks
—