3Com 4200G 12-Port Configuration Manual page 638

To do...
Configure the
destination IP address
Configure dns-server
Configure the source IP
address
Configure the source
port
Configure the test type
Configure the number
of probes per test
Configure the
maximum number of
history records that can
be saved
Configure the
automatic test interval
Configure the probe
timeout time
Configure the type of
service
Configure the type of
HTTP operation
Configure the HTTP
operation string and
HTTP version
Start the test
Display test results
5) Configuring jitter test on remote-ping client
Use the command...
destination-ip ip-address
dns-server ip-address
source-ip ip-address
source-port port-number
test-type http
count times
history-records number
frequency interval
timeout time
tos value
http-operation { get | post }
http-string string version
test-enable
display remote-ping results
[ admin-name operation-tag ]
1-8
Remarks
Required
You can configure an IP address or a
host name.
By default, no destination address is
configured.
Required when you use the
destination-ip command to configure
the destination address as the host
name.
By default, no IP address of the DNS
server is configured.
Optional
By default, no source IP address is
configured.
Optional
By default, no source port is configured.
Required
By default, the test type is ICMP.
Optional
By default, each test makes one probe.
Optional
By default, the maximum number is 50.
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Optional
By default, a probe times out in three
seconds.
Optional
By default, the service type is zero.
Optional
By default, the type of HTTP operation is
get, that is, the HTTP operation will get
data from the HTTP server.
Optional
By default, no HTTP operation string and
HTTP version are configured.
Required
Required
You can execute the command in any
view.