Got Side Settings - Mitsubishi Electric GOT1000 Series Connection Manual

15.3 GOT Side Settings

15.3.1 Setting communication interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting

RFID setting
3.
4.
Click!
1.
Select [Common]
from the menu.
2.
Set the interface to which the RFID controller is
connected.
3.
Select the [RFID Controller] to set the function. For
details on the function setting, refer to the following
manual.
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) Communication interface setting
(2) Setting for the driver
3.
[Peripheral Setting]
GT Designer3 Version1 Screen Design Manual
15.3.2 Communication detail settings
When Channel No.8 is used, the following external
devices, which use Channel No.8, cannot be
connected at the same time.
• Fingerprint authentication device
• Barcode reader that requires the power supply
When connecting the above-mentioned devices at
the same time, set [RFID] to Channels No. 5 to 7.
To Channels No. 5 to 8, multiple [RFID] cannot be
set.
15. RFID CONNECTION
15.3 GOT Side Settings
9
4.
10
11
12
Click!
[RFID]
13
14
15
15 - 3