Connectable Model List; System Configuration; Connecting To Rfid - Mitsubishi Electric GOT1000 Series Connection Manual

15. RFID CONNECTION

15.1 Connectable Model List

For connectable RFID controllers and system equipment, refer to the following Technical bulletin.
Visit the Mitsubishi Electric FA Equipment Information Service website (MELFANSweb) to refer to the Technical News.
http://wwwf2.mitsubishielectric.co.jp/english/index.html

15.2 System Configuration

15.2.1 Connecting to RFID

RFID controller
RFID controller
Model name
For connectable RFID controllers and system
equipment, refer to the following Technical
bulletin.
List of valid devices applicable for
GOT1000 series (GOT-A-0010)
POINT POINT POINT
When using the RS-232 communication unit
Use the RS-232 communication unit of the GOT for connecting to an RFID controller.
However, when the RS-232 communication unit is used, the following operations cannot be supported.
(a) Using the external authentication
(b) Supplying the power to an RFID controller from the GOT
HINT HINT HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
15 - 2
15. RFID CONNECTION
15.1 Connectable Model List
List of valid devices applicable for GOT1000 series (GOT-A-0010)
Connection cable
Connection cable
Varies according to
specification of RFID
controllers.
Mitsubishi Electric Products
Non-Mitsubishi Electric Products 1, Non-Mitsubishi Electric Products 2
Microcomputer, MODBUS Products, Peripherals
GOT
Varies according to the connection type.
GOT
Option device Model
For the system
- (Built into
configuration
GOT)
between the GOT
and PLC, refer to
each chapter.
GT15-RS2-9P
Extended function OS Communication driver
Connection type
RFID
dependent
PLC
Number of connectable
PLC
equipment
1 RFID controller for
1 GOT