Mitsubishi Electric GOT1000 Series Connection Manual page 293

Microcomputers, modbus products, peripherals
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

9.3 GOT Side Settings
9.3.1
Setting communication
interface
Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
[Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT
POINT
POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
Bar code reader setting
3.
4.
1.
Select [Common]
Code] from the menu.
2.
Set the interface to which the bar code reader is
connected.
Click!
3.
Check the [Use Bar Code] to set the function. For
details on the function setting, refer to the following
manual.
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
Click the [OK] button when settings are completed.
POINT
POINT
POINT
(1) Communication interface setting
(2) Setting for the driver
9. BAR CODE READER CONNECTION
2.
3.
[Peripheral Setting]
GT Designer3 Version1 Screen Design Manual
9.3.2 Communication detail settings
When Channel No.8 is used, the following external
devices, which use Channel No.8, cannot be
connected at the same time.
• Fingerprint authentication device
• RFID controller that uses the external
authentication
• RFID controller that requires the power supply
When connecting the above-mentioned devices at
the same time, set [Bar Code] to Channels No. 5
to 7.
To Channels No. 5 to 8, multiple [Bar Code]
cannot be set.
9.3 GOT Side Settings
9
4.
10
11
Click!
12
[Bar
13
14
15
9 - 3

Advertisement

Table of Contents
loading

Table of Contents