Modbus(R)/Tcp Equipment Setting; Device Range That Can Be Set - Mitsubishi Electric GOT1000 Series Connection Manual

5.4 MODBUS(R)/TCP Equipment Setting

For details of the MODBUS

5.5 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may
not be monitored.

Setting item
Item
Device
Information
Network
5 - 6
5. MODBUS(R)/TCP CONNECTION

5.4 MODBUS(R)/TCP Equipment Setting

®
/TCP equipment, refer to the manual of MODBUS
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of word device.
Set the file No.
File No.
The file No. can be set only when select 6 at [Device].
Displays the device type and setting range which are selected in [Device].
Set the station number of the controller to be monitored.
Host Select this item for monitoring the host controller.
• For GT16, GT15
Select this for monitoring other controllers.
After selecting the item, set the station number and network number of the controller to be monitored.
NW No.:
Other
Station No.: Set the station No.
• For GT11, GT10
Select this for monitoring other controllers.
After selecting, set the station number of the controller to be monitored.
Station No.: Set the station No.
Description
®
For the MODBUS /RTU connection, set "1".
®
For the MODBUS /TCP connection, set the network No.
®
/RTU equipment to be used.