Download  Print this page

Communication Detail Settings - Mitsubishi Electric GOT1000 Series Connection Manual

Microcomputers, modbus products, peripherals.
Hide thumbs

Advertisement

13.3.2 Communication detail settings

Make the settings according to the usage environment.
Item
Description
Set this item when change the
Transmission
transmission speed used for
Speed
communication with printer.
(Default: 19200bps)
Set this item when change the
data length used for
*1
Data Bit
communication with printer.
(Default: 8bits)
Specify the stop bit length for
Stop Bit
communications.
(Default: 1bit)
Specify whether or not to
perform a parity check, and how
Parity
it is performed during
communication.
(Default: None)
Set the number of retries to be
performed when a
Retry
communication error occurs.
(Default: 0times)
Set the time period for a
Timeout Time
communication to time out.
(Default: 30sec)
Set this item to adjust the
transmission timing of the
Delay Time
communication request from the
GOT.
(Default: 0ms)
Set this item when selecting the
XON/XOFF control for the
Control Method
control method.
(Default: XON/XOFF)
*1
When using the hard copy function, set to 8bit.
POINT
POINT
POINT
(1) Communication interface setting by the Utility
(2) Precedence in communication settings
Range
4800bps,
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
3 to 90sec
0 to 300ms
XON/XOFF,
fixed
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
User's Manual of GOT used.
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
13. PRINTER CONNECTION
13.3 GOT Side Settings
9
10
11
12
13
14
15
13 - 5

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT1000 Series

Comments to this Manuals

Symbols: 0
Latest comments: