Precautions - Mitsubishi Electric GOT1000 Series Connection Manual

8.4 Precautions


Fingerprint authentication setting
Set the fingerprint authentication and operator
authentication on the GT Designer3 and GOT.
For details, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual
User's Manual of GOT used.

Controller setting
The fingerprint authentication device requires the
power supply from the GOT. Therefore, set Channel
No. 8 using the standard interface.
If the channel No. other than Channel No. 8 is set, the
GOT does not recognize the device as a controller.
8 - 4
8. FINGERPRINT AUTHENTICATION DEVICE CONNECTION
8.4 Precautions