HINT
HINT
HINT
If the communication with MODBUS
is not established, some equipment which requires a
delay longer than 3.5 character time may be
connected.
Adjust the send delay time in the communication detail
setting.
POINT
POINT
POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
User's Manual of GOT used.
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
®
/RTU equipment
4. MODBUS(R)/RTU CONNECTION
4.4 GOT Side Settings
1
2
3
4
5
6
7
8
4 - 13