Connectable Model List; System Configuration; Connection Diagram - Mitsubishi Electric GOT1000 Series Connection Manual

7. CONNECTION TO EXTERNAL I/O
DEVICE

7.1 Connectable Model List

The following table shows the connectable models.
Series Clock
External I/O device
*1 Varies with the connected type.

7.2 System Configuration

7.2.1 Connecting to the external I/O device

When only inputting
External device
Name
Operation panel
*1 The power supply of 24VDC must be applied for the external I/O unit.
When the power supply of the external I/O unit is stopped in the operation, the operation panel becomes nonfunctional.
For using the operation panel again, reset the GOT after supplying the power to the external I/O unit.
*2 When starting, turn on the external power supply to the external I/O unit and turn on the GOT.
When turning off the external power supply, a system alarm occurs.
When a system alarm is generated, input/output cannot be performed.
In this case, turn on the main power of the GOT or reset the GOT.
(When bus connection is used, the reset switch on the GOT does not function.)
7 - 2
7. CONNECTION TO EXTERNAL I/O DEVICE
7.1 Connectable Model List
*1
Operation panel
Connection diagram number

Connection diagram 2)

Connection diagram 4)
Connection cable
DC power supply
*1
Connection cable
Connection diagram number
Connection diagram 1)
Connection diagram 3)
Extended function OS
External I/O /Operation panel
GOT
*2
GOT
Option device
GT15-DIO
GT15-DIOR
Refer to
7.2.1
Model