Ethernet Connection; System Configuration - Mitsubishi Electric GOT1000 Series Connection Manual

Microcomputers, modbus products, peripherals
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

10.3 Ethernet Connection

10.3.1 System Configuration

PC
Personal computer
Connection cable
Twisted pair cable
• 10BASE-T
Shielded twisted pair cable (STP)
To be selected by the
or unshielded twisted pair cable
user.
(UTP): Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 and 5e
*1
The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, wireless LAN adapter (NZ2WL-JPA or NZ2WL-JPS), or other system
equipment corresponding to the applicable Ethernet network system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
For the controllers that can be connected to the wireless LAN adapters and how to set the wireless LAN adapter, refer to the
manual of the wireless LAN adapter used.
*2
A straight cable is available.
When connecting the GOT and PC directly with Ethernet cable, remember that the by cross cable is available.
*3
When connecting GT16 of the function version A to an equipment that meets the 10BASE (-T/2/5) standard, use the switching
hub and operate in a 10Mbps/100Mbps mixed environment.
For how to check the function version, refer to the following.
*4
A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
HINT
HINT
HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
Mitsubishi Electric Products
Non-Mitsubishi Electric Products 1, Non-Mitsubishi Electric Products 2
Microcomputer, MODBUS Products, Peripherals
Connection cable
Maximum
*2
segment
*4
length
*1
100m
GT16 User's Manual (Hardware)
Communication driver
Extended function OS
PC remote operation
Ethernet system
(Ethernet)
GOT
Varies according to the
connection type.
GOT
Option device
Model
*3
- (Built into GOT)
10. PC REMOTE CONNECTION
10.3 Ethernet Connection
Communication driver
Connection type
dependent
PLC
Number of
PLC
connectable
equipment
For the system
1 personal
configuration between
computer for 1
the GOT and PLC,
GOT
refer to each chapter.
10 - 7
9
10
11
12
13
14
15

Advertisement

Table of Contents
loading

Table of Contents