Mitsubishi Electric GOT1000 Series Connection Manual page 63

POINT POINT POINT
Utility
(1) How to display Utility (at default)
When using GT16, GT1595, GT14, GT12 or GT1020
Utility call key
1-point press on GOT screen upper-left corner
When using GT1585, GT157 ,
GT156 , GT155 , GT11, GT105 ,
GT104 or GT1030
Utility call key
Simultaneous 2-point press
(2) Utility call
When setting [Pressing time] to other than 0 second on the setting screen of the utility call key, press and hold
the utility call key until the buzzer sounds.For the setting of the utility call key, refer to the following.
User's Manual of GOT used.
(3) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting] after writing
[Communication Settings] of project data.
For details on the Utility, refer to the following manual.
User's Manual of GOT used.
(4) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Utility display
(When using GT16,GT12)
(When using GT14, GT11)
(When using GT1030,GT1020)
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
(When using GT15)
(When using GT105 ,
GT104 )
1 - 35
1
2
3
4
5
6
7
8