Mitsubishi Electric GOT1000 Series Connection Manual page 61

3. 4.

For GT15, GT14 or GT11
1.
2.
3.
The [Communication Settings] appears.
4.
Verify that the communication driver name to
be used is displayed in the communication
interface box to be used.
5.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1.
After powering up the GOT, touch [Main menu]
2.
Touch [Communication setting].
(The screen on the left is not displayed on
GT11.)
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
1.1Setting the Communication Interface
[Communication setting] from the Utility.
1
2
3
4
5
6
7
8
1 - 33