Setting The Heating Pump Speed On The Heat Pump; Setting The Speed Of The Heating Pump On The Inside Module - DeDietrich AWHP 6 MR Installation And Service Manual

AWHP MIT-IN iSystem
0 2 4 6 8
E 1 TEMP.: 68°
2
1
D
2
# F
% $
AUTO
J I
5"
Installer level - Menu (#PRIMARY LIMITS)
Parameter
(1)
MHR.PUMP SPEED
(1) The menu is displayed only if the INSTALLATION parameter is set to EXTENDED
0 2 4 6 8
E 1
TEMP.: 68°
2
1
D
2
# F
% $
AUTO
J I
5"
Installer level - Menu (#PRIMARY LIMITS)
Parameter
(1)
PERCENT PUMP MIT
(1) The menu is displayed only if the INSTALLATION parameter is set to EXTENDED
24/09/2012 - 300027606-001-01
10 12 14 16 18 20 22 24
SUNDAY 11:45
!
 :
<
STD
C002235-F-04
Adjustment range Description
1 - 5 Speed of the heat pump heating pump 3
10 12 14 16 18 20 22 24
SUNDAY 11:45
!
 :
<
STD
C002235-F-04
Adjustment range Description
1 - 5 Inside module pump speed 3
5.4.5. Setting the heating pump speed on the heat
pump
The setting is used to select the speed of the primary pump located
between the condenser and the tank; it is important to guarantee
optimal performance of the heat pump.
1. Access the installer level: Press key - for around 5 seconds.
2. Select the menu (#PRIMARY LIMITS):
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 75.
5.4.6. Setting the speed of the heating pump on
the inside module
The setting is used to select the speed of heating pump A, located on
the secondary tank circuit. The speed must be selected in such a way
as to have a temperature differential between the flow and the return
of 5 to 10 K when running at nominal output.
1. Access the installer level: Press key - for around 5 seconds.
2. Select the menu (#PRIMARY LIMITS):
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 75.
Factory setting Customer setting
5. Commissioning
Factory setting Customer setting
AWHP 6: 1
AWHP 8, 11: 2
AWHP 14: 3
AWHP 16: 4
AWHP 22, 27: 5
86