DeDietrich AWHP 6 MR Installation And Service Manual page 63

AWHP MIT-IN iSystem
Settings to be made for this type of installation: MIT master module
Parameters
INSTALLATION
(1)
CASCADE:
MASTER CONTROLLER
(1)
SYSTEM NETWORK
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
Settings to be made for this type of installation: MIT slave module
Parameters
INSTALLATION
(1)
CASCADE:
MASTER
(1)
CONTROLLER
(1)
SLAVE NUMBER
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
24/09/2012 - 300027606-001-01
Access Settings to be made
Installer level
EXTENDED
Menu #SYSTEM
Installer level
ON
Menu #NETWORK
(1) Installer level
ON
Menu #NETWORK
Installer level Enlist generators or VMs in
Menu #NETWORK cascade mode.
Access Settings to be made See chapter
Installer level
EXTENDED
Menu #SYSTEM
Installer level
ON
Menu #NETWORK
Installer level
OFF
Menu #NETWORK
Installer level 2, 3, ...
Menu #NETWORK
Cascade outlet sensor
U
Connect the sensor to the S SYST terminal block on the
master appliance.
CAUTION
The "cooling" function is impossible with a connection in
cascade.
¼ "Displaying the parameters in extended
mode", page 78
¼ "Configuring the network", page 99
See chapter
¼ "Displaying the parameters in
extended mode", page 78
¼ "Configuring the network", page
99
4. Installation
62