Checks And Adjustments After Commissioning; Displaying The Parameters In Extended Mode; Setting The Parameters Specific To The Installation - DeDietrich AWHP 6 MR Installation And Service Manual

AWHP MIT-IN iSystem
5.4

Checks and adjustments after commissioning

0 2 4 6 8
E 1
TEMP.: 68°
2
1
D
2
F
#
% $
AUTO
J I
5"
Installer level - Menu #SYSTEM
Parameter Adjustment range Description
INSTALLATION CLASSIC
EXTENDED
0 2 4 6 8
E 1
TEMP.: 68°
2
1
D
2
# F
% $
AUTO
J I
5"
24/09/2012 - 300027606-001-01
10 12 14 16 18 20 22 24
SUNDAY 11:45
 ! :
<
STD
C002235-F-04
Displays the parameters of a conventional
installation
Displays all parameters
10 12 14 16 18 20 22 24
SUNDAY 11:45
 !
:
<
STD
C002235-F-04
5.4.1. Displaying the parameters in extended
mode
The display mode on the control panel is set as standard in such a
way as only to show the conventional parameters. It is possible to
switch to extended mode by proceeding as follows:
1. Access the installer level: Press key - for around 5 seconds.
2. Select the menu #SYSTEM.
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 75
3. Set parameter INSTALLATION to EXTENDED.
Regardless of what is done to the keys, the regulator
switches back to CLASSIC mode after 30 minutes.
5.4.2. Setting the parameters specific to the
installation
1. Access the installer level: Press key - for around 5 seconds.
2. Select the menu #SYSTEM.
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 75
3. Set the following parameters according to the connections made
to the PCBs:
5. Commissioning
Factory setting Customer setting
CLASSIC
78