Connecting The Mains Supply To The Inside Module; Connecting The Electrical Back-Up To The Inside Module (Mit-In/E Only) - DeDietrich AWHP 6 MR Installation And Service Manual

4. Installation
1
C3 C2 C1 L1 L2 L3
Configuration Alim appoint électrique Alim appoint électrique
PCU
C3 C2 C1 L1 L2 L3
Configuration Alim appoint électrique Alim appoint électrique
L1 L2 L3 N
1
47
2 3
S2 S3
N C
M002409-B
M002489-B
N C S2 S3 C3 C2
BUS<>HP BUS<>HP Configuration
n MIT-IN/E
Ouput configuration of electric back-ups
A
Auxiliary electrical power supply
Z
Bus for communication with the outside module
E
4.11.9. Connecting the mains supply to the inside
module
L (Live: Brown)
A
N (Neutral: Blue)
Z
* (Earth: Green/yellow wire)
E
Input
X1
CAUTION
The earth conductor must be longer than the live and
neutral conductors.
CAUTION
Use the cable clamps provided in the instructions bag.
4.11.10. Connecting the electrical back-up to the
inside module (MIT-IN/E only)
C1 L1 L2 L3 N C S2 S3
Alim appoint électrique Alim appoint électrique BUS<>HP BUS<>HP
L N
2
Three-phase power supply: 400 V AC
A
AWHP MIT-IN iSystem
M002408-D
24/09/2012 - 300027606-001-01