4. Installation
2
3
4
5
6
5
43
4.11.3.
To access the connection terminal blocks, proceed as follows:
1. Unscrew the 2 screws under the front panel by a quarter turn.
2. Remove the front panel.
1
M002382-B
3. Open the holding clips located on the sides.
4. Tilt the control panel forward.
3
M002383-B
5. Lift the clip located in front of the control panel.
6. Lift the control panel cover.
M002491-A
Accessing the connection terminal blocks
AWHP MIT-IN iSystem
24/09/2012 - 300027606-001-01