Voice Mail System - NEC SV9100 User Manual

OICE MAIL SYSTEM
V
Setting up your voicemail box
Get started by pressing the VMsg softkey on your telephone. If you prefer, lift the
handset for privacy.
The voicemail will ask you for a security code. The default is 0000. Enter this
code at this time.
The voicemail will now conduct a tutorial to help you set up your mailbox. Follow
the tutorial and answer the following questions by using:
1 for YES
2 for NO
Record Your name
Record your first and last name
Dial * to end the recording and listen to the review of your name
Dial 1 to re-record, otherwise dial 2
Directory Listing
Press 1 when prompted if would like to be included in the general directory. For
callers to find you if they don't know your extension number.
Record Your Greeting
Record your personal greeting.
Dial * to end the recording and listen to the review your greeting.
Dial 1 to rerecord, otherwise dial 2.
Security Code
You will be asked to chose a security code, enter it now, then press *.
Re-enter the new security, then press *.
Confirming Your Settings
Dial 1 to confirm and complete the setup.
*Note: You must Press 1 to confirm; otherwise your settings
for your mailbox will not be saved.
Using your mailbox
When you have a message in your mailbox the red light on the upper right-hand
side of the display will be illuminated.
To Retrieve Your Messages
Press the VMsg softkey.
When the voicemail answers it will prompt you for your security code, enter it
now.