Wireless Settings; Set The Profile Name - NEC MH240 Setup Manual

• WIRELESS SETTINGS

This section explains the wireless data for the phone. The following items are covered here.

Set the Profile Name

Set the ESSID (Manual)
Set the ESSID (AP Scan)
Set the Security (OPEN)
Set the Security (WEP)
Set the Security (WPA-PSK)
Set the Security (WPA2-PSK)
Set the Security (WPA)
Set the Security (WPA2)
Set the DHCP (IP)
Set the IP Address (Required when Selecting Fixed IP)
Set the Net Mask (Required when Selecting Fixed IP)
Set the Gateway (Required when Selecting Fixed IP)
Set the DNS Primary (Required when Selecting Fixed IP)
Set the DNS Secondary (Required when Selecting Fixed IP)
Set the Handover List
Set the Profile Name:
Factory Default: 1.DEFAULT (2 to 9 are blank)
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Press
STEP4: Press
STEP5: Edit Profile Name you want and then press "OK" soft key.
STEP6: Press
(See "PLACE THE PHONE IN CONFIG
to view Profile Select menu.
key to select a profile you want to edit and then press "OK" soft key.
to go to Profile Name edit screen.
to save.
1.DEFAULT
2.<Profile2>
3.<Profile3>
4.<Profile4>
Delete
Office1
12
6
MODE")
Prof. Select
OK Back
Prof. Name
OK Clear