Base Unit; Cordless Handset/Desk Phone Switch (Base Key Option); Figure 2-4 Base Unit Controls And Functions - NEC Dterm DTL-8R-1 Owner's Manual

Document Revision 1
___________________________________________________________________________________
4.2
17
18
19
20
4.3
___________________________________________________________________________________
2 - 6

Base Unit

The Base Unit allows users to switch between the D
phone and the wired (desk) phone by using the Desk/Cordless buttons on the
unit.
FRONT VIEW
17. Cordless
18. Power LED

Figure 2-4 Base Unit Controls and Functions

Cordless Handset/Desk Phone Switch (Base Key Option)

If Base Key Option is on, One Touch Dial Keys 3 and 4 on the Handset are
used to switch between Desk Phone or Handset:
One Touch Dial 3
Press and hold the
Key on the Base Unit).
One Touch Dial 4
Press and hold
on the Base Unit).
When the Base Key Option is set, One Touch Keys 3 and 4 cannot be used for One Touch
operation.
1. Start Up
Upon powering up (Battery connection) push 2 + 5 keys to set the Base Key
Option setting. The following screen displays along with a confirm tone.
Power Adapter
19. Desk
20. Stand
key to switch to the Handset (same as the Cordless
key to switch to the Desk Phone (same as the Desk key
About the D
term
D Cordless DECT
term
Cordless DECT
BACK VIEW
Modular Jacks
term
Cordless DECT