imagistics ipc1-im8130 Operator's Manual page 157

5 Click
dialog box.
6 To close the Rates dialog box without setting a new rate, click
Doing so returns you to the Refresh Rates dialog box.
7 From the Refresh Rates dialog box, click
the Configuration window.
8 To use the default rates for all items, click
OK
Discovery Tab
This tab displays the network (IP/IPX) address of each device for which
your computer has a printer driver installed.
Printer Name: is the printer driver name.
Port: is the port on your computer to which the driver is connected.
IP/IPX Address: is a 12-digit number that identifies the controller.
Update: prompts you to update the device and driver status now.
If ipc1 Document Monitor cannot determine the address, it displays
unknown and a question mark for the printer icon. The next time you print
using this printer driver, the system prompts you to locate the controller
before you can print.
Double-clicking the driver name opens Printer Utility and displays the
Device page for the selected device.
To find the printer address:
ipc1-im8130 Operator's Guide
to confirm the new rate and return to the Refresh Rates
OK
to apply the default rates and exit the Configuration window.
ipc1 Document Monitor Discovery Tab
to set the rate and exit
OK
, then click
Restore Defaults
.
Cancel
141